Page 2 of 4
Re: Build Thread: HMC Plymouth Cuda
Posted: Tue Aug 13, 2013 10:22 pm
by kiwi285
Fantastic offer George. That's what makes historic motorsport so enjoyable for all.
Re: Build Thread: HMC Plymouth Cuda
Posted: Thu Aug 15, 2013 2:49 am
by STG69
Can't wait to see this car take to the track! What's the intended 1st race meeting?
There was mention it may not be competitive due to front end weight etc. As a fan that's just fine. Smoking the rear bags to correct some understeer is what we all want to see anyway. It will certainly have some attitude with the Hemi and fat feet.
Now who's up to build a lime green challenger to complete the set??
Cheers
Kyle
Re: Build Thread: HMC Plymouth Cuda
Posted: Thu Aug 15, 2013 3:12 am
by Steve Holmes
Kyle, agreed! Winning races isn't what this car is about. Its about entertainment, both for the driver and the punters. Its hoped the car will be ready to race at the new Cromwell track in late January. I believe Andrew Sinclair (Keith's son) will race it at this event, which is a non-Historic Muscle Cars event. Keith will race it in HMC events.
Re: Build Thread: HMC Plymouth Cuda
Posted: Sun Aug 18, 2013 4:46 am
by Steve Holmes
Latest update, with the Cuda having undergone its sheet metal work, with rust removal and fitment of new replacement rear quarters and front guards (fenders). This is from Bic, at Sonic: "Moselle’s (Moselle Panel And Paint) did a few small rust repairs to existing panels and repaired the Left-hand sill where it had seen some earlier 'action'. The next steps are: fit the engine and transmission, and mod the tunnel as required for the shifter and servicing there-of, gas and oil tank mounts, the battery and fuel system stuff in the boot, seat mounts/belt anchorages and get the cage started".
[ATTACH]20653[/ATTACH]
[ATTACH]20654[/ATTACH]
[ATTACH]20655[/ATTACH]
Re: Build Thread: HMC Plymouth Cuda
Posted: Tue Aug 20, 2013 10:40 pm
by George Sheweiry
The car is already built but for Central Muscle cars and is sitting in John Windelburns (poppa smurf) workshop getting finished off. It has been sitting there for two years though. Certainly looks good.Here are some photos of the real car at a vitage race meet I went to at Sears point in May this year.[ATTACH]20777[/ATTACH][ATTACH]20778[/ATTACH][ATTACH]20779[/ATTACH]
STG69 wrote:Can't wait to see this car take to the track! What's the intended 1st race meeting?
There was mention it may not be competitive due to front end weight etc. As a fan that's just fine. Smoking the rear bags to correct some understeer is what we all want to see anyway. It will certainly have some attitude with the Hemi and fat feet.
Now who's up to build a lime green challenger to complete the set??
Cheers
Kyle
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 12:22 am
by STG69
Hey George,
Thanks for the info. I figured someone must have built a tribute car. Just a pity it's not racing. Would be great to see it in with the Cuda running HMC. More importantly though just racing!
I've followed your thread on the new class. Fantastic to see! I hope the guys with some of the cars you'd like to see on the grid find the same level of motivation you have. Well done!
Cheers
Kyle
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 12:29 am
by kiwi285
Do you think we might be able to twist his arm to get it finished sooner rather than later. That car would be a great addition to any V8 field in NZ.
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 12:36 am
by John McKechnie
I saw this a few months ago, probably still looks the same as when George saw it . I dont think arm twisting will get it there.
When the owner is ready...........
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 1:01 am
by Steve Holmes
Like George said, the NZ Challenger was being built for Central Muscle Cars, not Historic Muscle Cars. Its owner bought the '65 Mustang off Richard Gatward a few years ago and has been racing that from time to time. Unless the build has had a change of direction in recent years, it won't fit HMC regs, as it has 17" wheels, big brakes, and a Nascar motor.
I believe though there is one being built in Queensland for the Australian Trans-Am series. Hopefully that'll be an Autodynamics tribute car.
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 4:04 am
by fullnoise68
Steve Holmes wrote:Like George said, the NZ Challenger was being built for Central Muscle Cars, not Historic Muscle Cars. Its owner bought the '65 Mustang off Richard Gatward a few years ago and has been racing that from time to time. Unless the build has had a change of direction in recent years, it won't fit HMC regs, as it has 17" wheels, big brakes, and a Nascar motor.
I believe though there is one being built in Queensland for the Australian Trans-Am series. Hopefully that'll be an Autodynamics tribute car.
There`s actually two being built in Queensland Steve, one on either side of the fence!
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 7:21 am
by Steve Holmes
Thanks Steve, will either be Autodynamics replicas?
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 7:29 am
by fullnoise68
Without giving too much away Steve, I believe so.....
Re: Build Thread: HMC Plymouth Cuda
Posted: Wed Aug 21, 2013 7:35 am
by Steve Holmes
Thanks Steve, that is awesome! Autodynamics actually ran two Challengers in the 1970 Trans-Am, late in the season when Chrysler were beginning to put the pressure on them to win a race in order to keep the funding going for 1971. So technically, both the ATA Challengers could be Autodynamics replicas.
Re: Build Thread: HMC Plymouth Cuda
Posted: Mon Sep 02, 2013 8:57 pm
by Steve Holmes
Couple more update photos. She's really starting to take shape now!
Info from Bic: "I can start some serious construction now, motor and gearbox mounted, Dana 60 width defined and under construction, floor to shifter clearance etc".
[ATTACH]21058[/ATTACH]
[ATTACH]21059[/ATTACH]
Re: Build Thread: HMC Plymouth Cuda
Posted: Mon Sep 16, 2013 7:47 am
by kiwi285
Great to see this build on the website.
Is the car still on track for its debut later this year ?
Re: Build Thread: HMC Plymouth Cuda
Posted: Thu Sep 19, 2013 3:18 am
by Steve Holmes
Some neat before and after pics of the fabrication work Bic has done on the rear transmission and diff tunnel to clear the monstrous Dana 60 diff. He has done a great job of making it look factory. You need to study the before and after pics to pick it up, otherwise you'd probably never know.
Before:
[ATTACH]21570[/ATTACH]
After:
[ATTACH]21571[/ATTACH]
[ATTACH]21572[/ATTACH]
Re: Build Thread: HMC Plymouth Cuda
Posted: Mon Sep 30, 2013 2:27 am
by Steve Holmes
OK, lots of good stuff happening here, Bic has been busy as you can see. Rollcage has been constructed, drivers seat fitment all done, battery box and dry-sump tank fitment all done. Looking good!
[ATTACH]21851[/ATTACH]
[ATTACH]21852[/ATTACH]
[ATTACH]21853[/ATTACH]
[ATTACH]21854[/ATTACH]
Re: Build Thread: HMC Plymouth Cuda
Posted: Mon Sep 30, 2013 11:21 pm
by Kiwiboss
I went to do an inspection on it Sunday and got locked out!! security gates an all, LOL
Heard that the Warkworth boat builders had been around and that Automated foils have been fitted so I have a couple of drones flying over head, watch this space for more to come!!!
Dale M(LOL, LOL)
Re: Build Thread: HMC Plymouth Cuda
Posted: Tue Oct 01, 2013 8:08 am
by Rod Grimwood
Kiwiboss wrote:I went to do an inspection on it Sunday and got locked out!! security gates an all, LOL
Heard that the Warkworth boat builders had been around and that Automated foils have been fitted so I have a couple of drones flying over head, watch this space for more to come!!!
Dale M(LOL, LOL)
Dale, a chilly bin is a good starter with those boys, they weaken.
Re: Build Thread: HMC Plymouth Cuda
Posted: Tue Oct 01, 2013 9:49 am
by Kiwiboss
Rod Grimwood wrote:Dale, a chilly bin is a good starter with those boys, they weaken.
Must remember that when it comes to race day Rod!! i got the feeling you know them WELL!!!!
Dale M